pneumatic conveying, pneumatic conveyor,pneumatic transport,dilute phase,dense phase

MICRO DOSAGES
If your products are consisted of a number of raw materials (15-20 units) and the quantities of these mixtures require sensitivity;

We perform automatic serial dosing operations in both mechanical and automatic way by using micro weighing accuracy of 1, 2, 5g to ensure you to have target products in the most accurate way. Dosing of more than one raw material at the same place by using the decreasing or increasing weighing technique is among the applications we perform.

FILTER and DUST SEPARATION SYSTEMS
As all raw materials we transport by means of pneumatic or mechanical transport method are in form of powder and granule, there definitely raise dust after entering into the process. In order to prevent it and separate the material from the air again, it is required to use dust separators or, so called, filters.

We use package dust separating systems or products of WAM, LETHANBEURGER, KEK products depending on the characteriStic of your process, particle size of the transport material and operating condition under vacuum and pressure.

In all transfer operations and filter manufacturing, we cooperate with European solution partners and domeStic filter cloth producers and companies producing specific filter element and also use 100% Teflon DuPont products that may operate with the jet pulse systems with its construction developed by us.

These products are filters designed to operate at maximum temperature of 150-250oC and separate particles 1-5 microns in size, having large dust holding filters in small diameters. Additionally, depending on the process to be used, 1- Surface Polishing, 2-Calender, 3- Teflon Impregnation, 4- PTF coating and 5- Special resin covering operations are performed to provide the most efficient pneumatic transfer operation.

The reason is that we know a good dust holding system is one of the most important aspects for pneumatic transfer. For this fact, we cooperate with the best international and national trademarks (WAM, LETHANBEURGER, MIX and KEK are the registered trademarks of the companies).

Dehumidifiers-Coolers:
This equipment change atmospheric conditions of the air used in the processes. When performing pneumatic transport in some processes, the air delivered by the blower may reach to 65-70oC, possibly making change in the characteriStics of the raw material to be transported. For this reason, complex equipment cooling or removing moisture of the air are required.

Mechanical Conveyor

*Vibration Conveyor,Mecahanic Conveyor,Screw

Download PDF Brochure