DOSERAY

STORAGE - DOSING - CONVEYING

 

Sultan Makina Ltd.Sti.

+90-226 353 21 21

TURKISH ROTARY VALVE turkish

 rotary valve

ROTARY VALVE PROCESS

Our rotary valves are highly regarded as top-quality products in the plaStics, chemical, food and minerals industries around the at TURKEY.

rotary valve airlock

AIR LOCK

For the versions intended for powdered materials, the valve has the top of the bevelled fins, which reduces the adhesion of the material between the rotor and the carcass, and thus the friction, avoiding possible valve locking.

WHAT IS THE ROTARY  valve ?

When performing transfer on all pneumatic conveying lines, it is a device to feed the material down to the line and separate the raw material pneumatically transferred from the air. Blade forms, tolerances, revolution speeds vary depending on type of process and type of the product to be transported. Likewise, it may also act as breaker depending on the characteriStics of the material to be transported. Even it may also operate coupled with the breakers.


Rotary Valves ( AIRLOCKS)  are available with square or round inlet and outlet flanges. Housing can be fabricated out of sheet material or cast. Common materials are cast Iron, carbon steel, 304 SS, 316 SS, and other materials. Rotary valve , AIRLOCK feeders are often available in standard and heavy duty models, the difference being the head plate and bearing configuration. Heavy duty models use an outboard bearing in which the bearings are moved out away from the head plate. Housing inlet and discharge configurations are termed drop-thru or side entry. Different wear protections are available such as hard chrome or ceramic plating on the inner housing surfaces. Grease and air purge fittings are often provided to prevent contaminants from entering the packing seals. Rotary Valve - AIRLOCK - Star Feeder may be made of ST37 Carbon Steel and AISI-304 AISI-316 Stainless Steel. Bedding types of the AIR LOCKs may be mechanical sealing and felt, again depending on the hot process.

ROTARY VALVE APPLICATION
Rotary Valves (Rotary Feeders) are widely used in the unloading and dosing of powder and granular materials in silos, hoppers, pneumatic conveying system, bag filters, cyclones and other equipment, in a measured and reliable manner, allowing a detailed volumetric control in transport systems or processing.


  Bulk Solids
Grains
Powder
Fine powder
Grease (only with special model)
Granules
Application procedures
Discharging
Metering
Feeding
Protective System

Operation
The bulk goods are fed into the rotary valve rotor via the inlet. This is made up of several chambers and divides the product flow into small partial flows. These partial quantities are fed into the downstream process via the outlet.

Range of application
Chemical industry
PlaStic industry
Pharmaceutical industry
Food industry
Similar industries

rotary valve - air lock body

ROTARY VALVE ROTOR TYPES

  • rotary valve rotorairlock body2rotary valve rotor typerotary valve rotor type 6rotary valve rotor type 5rotary valve rotor type 9rotary valve rotor type 2
  • Rotary Valve - Airlocks-Star Feeder internal Rotors have options such as blade, rounded type, adjusted blade type, stripper and polyamide.  Discharging valve for fine and coarse-grained products
    Max. capacity through ideal ratio of rotor volume and inlet cross section
    Special inlet geometry purpose-built for gentle product handling
    With feeding show also suitable for feeding bulk materials into pneumatic conveying systems at up to 1.5 barg (21 psi)
  • rotary valve rotor type

PDF brochure rotary valve pdf

ROTARY VALVE APPLICATIONS

A rotary valve is of no use by itself. Rotary valve, AIRLOCKs, and rotary valve are useful as one component in a bulk or specialty material handling system. Rotary Valve, AIRLOCKs Feeders have wide application in industry wherever dry free-flowing powders, granules, crystals, or pellets are used. Typical materials include: cement, sugar, minerals, grains, plaStics, dust, fly ash, flour, gypsum, lime, coffee, cereals, pharmaceuticals, etc...

Drop Thru Rotary Valve Models

 

Blow Thru Rotary Valve Models

While pneumatic transport processes differ according to the phases, it may also diffrent in the same phase. Low pressure, that is dilute phase transfer, can be categorized under 2 classes, namely vacuum and pressure. This classification shows, even slightly, differences in the rotary valve - AIRLOCKs. Consequently, we perform manufactures according to the AIR LOCKs to be used on the vacuum and pressure line.

usage as

Rotary alve, AIRLOCK feeders/ rotary AIRLOCK valves are used in pneumatic conveying systems,dust control equipment, and as volumetric feed-controls.

ROTARY VALVE capacıty

rotary valve capacity

airlock body

Rotary AIRLOCK feeders have wide application in industry wherever dry free-flowing powders, granules, crystals, or pellets are used. Typical materials include: cement,
ore, sugar, minerals, grains, plaStics, dust, fly ash, flour, gypsum, lime, coffee, cereals, pharmaceuticals, etc...

  • Lebels: rotary valve, rotary AIRLOCK, AIRLOCK valve, rotary feeder, blow through rotary valve, flow through AIRLOCK, silo discharge, cyclone discharge, dust collection, pneumatic conveying, rotary AIR LOCK valve, rotary ,Heavy Duty Rotary Airlock, valve producer, rotary valve price, rotary valve tecnichal draw
MORE